TEXT

International Journal of Automotive and Mechanical Engineering (IJAME), Volume 11 , January-June 2015

---

-Energy and Waste Management for Petroleum Refining Effluents: A Case Study in Bangladesh
A.K. Azad, M.G. Rasul, M. Mofijur, M.M.K. Bhuiya, Sukanta Kumar Mondal and M. Kafilur Sattar
-Experimental Study on Laminar Flame Speeds and Markstein Length of Propane Air Mixtures at Atmospheric Conditions
A. A. Yousif, S. A. Sulaiman and M. S. Nasif
-
A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel
M.M. Hasan, M.M. Rahman, and K. Kadirgama
-Effect of Spokes Structures on Characteristics Performance of Non-Pneumatic Tires
A.M. Aboul-Yazid, M.A.A. Emam, S. Shaaban and M.A. El-Nashar
-
A Mean Value Model for Estimation of Laminar and Turbulent Flame Speed in Spark-Ignition Engine
Ali Ghanaati, Intan Z. Mat Darus, Mohd Farid Muhamad Said and Amin Mahmoudzadeh Andwari
-
Investigation of Auto-Ignition of Octane-CNG Mixture in HCCI Engine
Firmansyah and A. Rashid. A. Aziz
-
Experimental Study of a Domestic Refrigerator with POE-Al2O3 Nanolubricant
T.M. Yusof, A.M. Arshad, M.D. Suziyana, L.G. Chui and M.F. Basrawi
-
Finite Element Analysis of Heat Transfer in Multi-Layer Cooking Pots With Emphasis on Layer Number
Mohammadreza Sedighi and Behnam Nilforooshan Dardashti
-
Comparative Cost-Based Analysis of a Novel Plug-in Hybrid Electric Vehicle with Conventional and Hybrid Electric Vehicles
A.R. Salisa, P.D. Walker, N. Zhang and J.G. Zhu
-
Comparative Cost-Based Analysis of a Novel Plug-in Hybrid Electric Vehicle with Conventional and Hybrid Electric Vehicles
A.R. Salisa, P.D. Walker, N. Zhang and J.G. Zhu
-
Temperature Analysis when using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
M. Yogeswaran, K. Kadirgama, M.M. Rahman and R. Devarajan
-Performance Study of Imitated Syngas in a Dual-Fuel Compression Ignition Diesel Engine
Bahaaddein K.M. Mahgoub, S.A. Sulaiman and Z.A. Abdul Karim
-
Nanofluids Heat Transfer Enhancement through Straight Channel under Turbulent Flow
M. Kh. Abdolbaqi, C.S.N. Azwadi, R. Mamat, W.H. Azmi and G. Najafi
-Simulation of Fuel Economy for Malaysian Urban Driving
M.A. Abas, M.F. Muhamad Said, S.F. Zainal Abidin and I. Zahari
-Experimental Analysis of Microstructure and Mechanical Properties of Copper and Brass Based Alloys
Sujit Kumar Jha, Devibala Balakumar and Rajalingam Paluchamy
-Artificial Neural Network Optimization Modeling on Engine Performance of Diesel Engine using Biodiesel Fuel
M.R. Shukri, M.M. Rahman, D. Ramasamy and K. Kadirgama
-Fuel Injection Timings of a Direct Injection Diesel Engine Running on Neat Lemongrass Oil-Diesel Blends
Sathiyamoorthi R.and Sankaranarayanan G.
-Effect of Aging Time on Microstructure and Mechanical Properties of AA6061 Friction Stir Welding Joints
R. Ahmad and M.B.A. Asmael
-
Effect of Ambient Temperature on Diesel-Engine Combustion Characteristics Operating with Alcohol Fuel
M.K. Akasyah, R. Mamat, A. Abdullah, A. Aziz and H.M. Yassin
-
Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Port-Injection Hydrogen-Fueled Engine
Mohammed Kamil and M.M. Rahman
-
Influence of Hot Burned Gas Utilization on the Exhaust Emission Characteristics of a Controlled Auto-Ignition Two-Stroke Cycle Engine
A.M. Andwari, A.A. Aziz, M.F.M. Said, Z.A. Latiff and A. Ghanaati
-
Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine
Devarajan Ramasamy, K. Kadirgama, M.M. Rahman and Z.A. Zainal
-
Fatigue Life Analysis and Optimization of a Passenger Car Steering Knuckle under Operating Conditions
V. Sivananth and S.Vijayarangan
-A Descriptive Analysis of Factors Contributing to Bus Drivers’ Performances while Driving: A Case Study in Malaysia
A.R. Ismail, Siti Nur Atikah Abdullah, A.A. Abdullah and B.M. Deros
-
Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas Welding
M. Ishak, N.F.M. Noordin, A.S.K. Razali, L.H.A. Shah and F.R.M. Romlay
-
Performance and Emissions Characteristics of Crude Jatropha Oil Biodiesel Blends in a Diesel Engine
A. Khalid, N. Jaat, A. Sapit, A. Razali, B. Manshoor, I. Zaman and A.A. Abdullah
-
A GA–ANN Hybrid Model for Prediction and Optimization of CO2 Laser-MIG Hybrid Welding Process
S. Chaki and S. Ghosal
-Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron using Minimum Quantity Lubrication
M.M. Rahman and K. Kadirgama
-Characteristics of K3-VEI4 Engine Performance using Swirl Generator, Air Intake Tank and Exhaust Gas Recirculation Modification
M.H. Mat, N.H. Badrulhisam, A.Q. Hanafiah, N.R. Abdullah and A.M.I. Mamat
-Ride Comfort Simulation of a Vehicle Equipped with Semi-Active Steering System
M. Maharun, M.B. Baharom and M.S. Mohd
-
Study on Low-Cycle Fatigue Behavior of Cast Hybrid Metal Matrix Composites
AKM Asif Iqbal and Yoshio Arai
-
Experiments on Vortex-Induced Vibration of a Vertical Cylindrical Structure: Effect of Low Aspect Ratio
M.A.A. Rahman, and K.P. Thiagarajan
-Analysis of a Metal Matrix Composites Automotive Component
N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin
-Stress Behavior of Tailor-Welded Blanks for Dissimilar Metals using Finite Element Method
L.C. Wor and M.M. Rahman
-
Photocatalytic Decolorization of Tartrazine using Periwinkle Shell Ash: Effect of Operational Variables, Kinetic and Isotherm Study
N.A. Amenaghawon, J.O. Osarumwense, F.A. Aisien and O.K.Olaniyan
-
Dual-Criteria Method for Determining Critical Plane Orientation for Multiaxial Fatigue Prediction using a Genetic Algorithm
M. Kamal and M.M. Rahman
-
Characteristics of Solar Thermal Absorber Materials for Cross Absorber Design in Solar Air Collector
Z.A.A. Majid, A.A. Razak, M.H. Ruslan and K. Sopian
-
Parametric Optimization of Magneto-Rheological Fluid Damper using Particle Swarm Optimization
M.R. Azraai, G. Priyandoko, A.R. Yusoff and M.F.F.A. Rashid
-
Experimental Investigations on Corrosion Model of Welded 6061 Aluminum Exposed In NaCl Solution
Y.P. Asmara, J.P. Siregar, L.H. Shah and C. Tezara
-
Neural Network Modeling of Grinding Parameters of Ductile Cast Iron using Minimum Quantity Lubrication
N.S.M. Sahid, M.M. Rahman and K. Kadirgama
-
Investigation of Epoxy Powder Coated Galvanized Steel Substrate through Electrostatic Powder Coating System
R. Ahmad and M.R. Ajer
-Optimal Nonlinear Control of Vehicle Braking Torques to Generate Practical Stabilizing Yaw Moments
M. Jafari, M. Mirzaei and H. Mirzaeinejad
-
Performance Evaluation of Shaft Speed Control using a Magnetorheological Brake
M.A. Abdullah, A.Z. Zainordin and K. Hudha
-Engagement Slip Controller Development based on Actuator Displacement for an Electro-Mechanical Friction Clutch System
M.S. Che Kob, B. Supriyo, K.B. Tawi and I.I. Mazali
-
Determination of Diesel Engine Performance Fueled Biodiesel (Rubber Seed/Palm Oil Mixture) Diesel Blend
Ibrahim K. Adam, A. Rashid A. Aziz and Suzana Yusup
-Fatigue Life Estimation Based on Continuum Mechanics Theory with Application of Genetic Algorithm
M. Kamal and M.M. Rahman
-
Machining Performance of Aluminum Alloy 6061-T6 on Surface Finish using Minimum Quantity Lubrication
M.S. Najiha, M.M. Rahman and K. Kadirgama
-
Mechanical Strength of Dissimilar AA7075 And AA6061 Aluminum Alloys using Friction Stir Welding
N.A.A. Sathari, A.R. Razali, M. Ishak and L.H. Shah
-
Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6
M.S. Najiha, M.M. Rahman and K. Kadirgama
-
Development Concept of a Portable Quality-Confirmation Inspection Device for Automotive Body Parts
B.W. Momang and N.M.Z.N. Mohamed
-Forced Convection Heat Transfer using Water- Ethylene Glycol (60:40) based Nanofluids in Automotive Cooling System
N.A. Usri, W.H. Azmi, R. Mamat and K. Abdul Hamid
-An Integrated Approach for Fatigue Life Estimation based on Continuum Mechanics Theory and Genetic Algorithm
M. Kamal and M.M. Rahman
-Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 using TiAlN Coated Carbide Tools
M.S. Najiha and M.M. Rahman
-
Whole-Body Vibration Exposure of Malaysian Taxi Drivers
A.R. Ismail, S.N.A. Abdullah, A.A. Abdullah and B.M. Deros
-Operation and Control of Split-Parallel Through-the-Road Hybrid Electric Vehicle with In-wheel Motors
Saiful A. Zulkifli, Syaifuddin Mohd, Nordin Saad and A. Rashid A. Aziz

---

Ketersediaan

Informasi Detail

Judul Seri

International Journal of Automotive and Mechanical Engineering (IJAME)

No. Panggil

REF 620 TIM i

Penerbit

Malaysia : Universiti Malaysia Pahang., 2015

Deskripsi Fisik

hlm, 2170-2808

Bahasa

Indonesia

ISBN/ISSN

2229-8649

Klasifikasi

620

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

Volume 11 , January-June 2015

Subjek

Operation and Control
Vehicle with In-wheel Motors
Malaysian Taxi Drivers
Experimental Study on Minimum Quantity
An Integrated Approach for Fatigue
Forced Convection Heat Transfer using
Energy and Waste Management
Experimental Study on Laminar Flame
A Review on Homogeneous Charge
Effect of Spokes Structures
A Mean Value Model for Estimation
Investigation of Auto-Ignition
Experimental Study of a Domestic
Finite Element Analysis of Heat
Comparative Cost-Based Analysis
Temperature Analysis when using
Performance Study of Imitated
Nanofluids Heat Transfer Enhancement
Experimental Analysis of Microstructure
Artificial Neural Network
Fuel Injection Timings
Effect of Aging Time on Microstructure
Influence of Hot Burned Gas Utilization
Analysis of Compressed
Fatigue Life Analysis and Optimization
Experiments on Vortex-Induced
Analysis of a Metal Matrix
Stress Behavior of Tailor-Welded
Dual-Criteria Method for Determining
Characteristics of Solar Thermal
Optimal Nonlinear Control
Performance Evaluation
Engagement Slip Controller Development based
Fatigue Life Estimation Based
Machining Performance
Mechanical Strength of Dissimilar
Forced Convection Heat Transfer

Info Detail Spesifik

-

Pernyataan Tanggungjawab

International Journal of Automotive and Mechanical Engineering (IJAME)

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar